Free ladder SVG

Tree house with a ladder SVG

Tree house with a ladder, as a solid black shape
Tree house with a ladder. The preview is the SVG file itself.

A little house in the fork of a tree: a gable roof, a cross-barred window, an arched door and a platform on the trunk, with a ladder running down to the ground behind one bough. A thin gap parts the house from the leaves and the ladder from the bough.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size98 × 100 mm (3.84 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length1,044 mm at this size
Narrowest part3.8 mm at this size
Nodes134 curve and line segments

Measured from the file. PNG: 1,954 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.98 × 1 in (25 × 25 mm)0.97 mm265 mm100Fine detail: vinyl and paper only, weed with care
1.95 × 2 in (50 × 51 mm)1.9 mm530 mm25Vinyl, card and thin sheet
2.93 × 3 in (74 × 76 mm)2.9 mm796 mm9Vinyl, card and thin sheet
3.9 × 4 in (99 × 102 mm)3.9 mm1,061 mm4Any material, including 3 mm wood and acrylic
5.86 × 6 in (149 × 152 mm)5.8 mm1,591 mm2Any material, including 3 mm wood and acrylic
7.81 × 8 in (198 × 203 mm)7.7 mm2,121 mm1Any material, including 3 mm wood and acrylic
11.71 × 12 in (297 × 305 mm)12 mm3,182 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ladder SVG files

← Ladder in an apple tree All 13 ladders Ladder shelf with plants →