Free ladder SVG

Ladder outline SVG

Ladder outline, drawn as a line
Ladder outline. The preview is the SVG file itself.

A chunky ladder drawn in line: two hollow rails with rounded ends and six hollow rungs between them, upright and the same on both sides. For colouring pages, growth charts, foil and pen plotters.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size40 × 100 mm (1.56 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut14: 1 outer edge and 13 cut-outs
Cut length1,272 mm at this size
Narrowest part2.2 mm at this size
Nodes68 curve and line segments
SymmetryMirror

Measured from the file. PNG: 838 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.4 × 1 in (10 × 25 mm)0.56 mm323 mm200Fine detail: vinyl and paper only, weed with care
0.79 × 2 in (20 × 51 mm)1.1 mm646 mm60Vinyl, card and thin sheet
1.19 × 3 in (30 × 76 mm)1.7 mm969 mm24Vinyl, card and thin sheet
1.58 × 4 in (40 × 102 mm)2.2 mm1,292 mm12Vinyl, card and thin sheet
2.38 × 6 in (60 × 152 mm)3.4 mm1,939 mm4Any material, including 3 mm wood and acrylic
3.17 × 8 in (80 × 203 mm)4.5 mm2,585 mm3Any material, including 3 mm wood and acrylic
4.75 × 12 in (121 × 305 mm)6.7 mm3,877 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ladder SVG files

← Two ladders crossed All 13 ladders Layered step ladder in four colours →