Free ladder SVG

Step ladder with a paint can SVG

Step ladder with a paint can, as a solid black shape
Step ladder with a paint can. The preview is the SVG file itself.

A step ladder set up for decorating: four flat treads, a top cap, two braced back legs and a tin of paint on top with its handle up and a run of paint down the side.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size57 × 100 mm (2.26 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length807 mm at this size
Narrowest part3.6 mm at this size
Nodes107 curve and line segments

Measured from the file. PNG: 1,181 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.57 × 1 in (15 × 25 mm)0.91 mm205 mm150Fine detail: vinyl and paper only, weed with care
1.15 × 2 in (29 × 51 mm)1.8 mm410 mm45Vinyl, card and thin sheet
1.72 × 3 in (44 × 76 mm)2.7 mm615 mm18Vinyl, card and thin sheet
2.3 × 4 in (58 × 102 mm)3.7 mm820 mm8Any material, including 3 mm wood and acrylic
3.44 × 6 in (87 × 152 mm)5.5 mm1,230 mm3Any material, including 3 mm wood and acrylic
4.59 × 8 in (117 × 203 mm)7.3 mm1,640 mm2Any material, including 3 mm wood and acrylic
6.89 × 12 in (175 × 305 mm)11 mm2,460 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ladder SVG files

← Step ladder silhouette All 13 ladders Ladder against a brick wall →