Kwanzaa in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Kwanzaa” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 16 mm (3.94 × 0.65 in), scales to any size |
|---|---|
| Pieces | 7 separate pieces |
| Outlines to cut | 10: 7 outer edges and 3 cut-outs |
| Cut length | 512 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 160 curve and line segments |
Measured from the file. PNG: 2,000 × 392 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.16 in (25 × 4 mm) | 0.53 mm | 130 mm | 330 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.33 in (51 × 8 mm) | 1.1 mm | 260 mm | 115 | Vinyl, card and thin sheet |
| 3 × 0.49 in (76 × 12 mm) | 1.6 mm | 390 mm | 51 | Vinyl, card and thin sheet |
| 4 × 0.66 in (102 × 17 mm) | 2.1 mm | 520 mm | 28 | Vinyl, card and thin sheet |
| 6 × 0.98 in (152 × 25 mm) | 3.2 mm | 780 mm | 10 | Any material, including 3 mm wood and acrylic |
| 8 × 1.31 in (203 × 33 mm) | 4.3 mm | 1,040 mm | 8 | Any material, including 3 mm wood and acrylic |
| 12 × 1.97 in (305 × 50 mm) | 6.4 mm | 1,561 mm | 5 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Kwanzaa SVG files
-
Kwanzaa in Amatic SC Solid · 7 pieces
-
Kwanzaa in block capitals Solid · 7 pieces
-
Kwanzaa with a swash underline Solid · one piece
-
Kwanzaa with stars Solid · 11 pieces
-
Kwanzaa outline lettering Outline · 7 pieces
-
Kwanzaa stencil plate Solid · one piece
-
Kwanzaa with a drop shadow Layered · 2 pieces
-
Kwanzaa with three candles Solid · 6 pieces
← Kwanzaa in Lilita One All 13 Kwanzaa designs Kwanzaa in Amatic SC →