Free Kwanzaa SVG

Kwanzaa stencil plate SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Kwanzaa stencil plate, as a solid black shape — Kwanzaa stencil plate. The preview is the SVG file itself.

A rounded plate with “KWANZAA” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

What is in the file

Size	100 × 33 mm (3.94 × 1.3 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	799 mm at this size
Narrowest part	1 mm at this size
Nodes	194 curve and line segments

Measured from the file. PNG: 2,000 × 713 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.33 in (25 × 8 mm)	0.25 mm	203 mm	220	Too fine for most machines
2 × 0.66 in (51 × 17 mm)	0.51 mm	406 mm	70	Fine detail: vinyl and paper only, weed with care
3 × 0.99 in (76 × 25 mm)	0.76 mm	609 mm	30	Fine detail: vinyl and paper only, weed with care
4 × 1.32 in (102 × 34 mm)	1 mm	812 mm	16	Vinyl, card and thin sheet
6 × 1.99 in (152 × 50 mm)	1.5 mm	1,218 mm	5	Vinyl, card and thin sheet
8 × 2.65 in (203 × 67 mm)	2 mm	1,624 mm	4	Vinyl, card and thin sheet
12 × 3.97 in (305 × 101 mm)	3 mm	2,435 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Kwanzaa SVG files

← Kwanzaa outline lettering All 12 Kwanzaa designs Kwanzaa with a drop shadow →