Free Kwanzaa SVG

Kwanzaa in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Kwanzaa in Pacifico, as a solid black shape — Kwanzaa in Pacifico. The preview is the SVG file itself.

“Kwanzaa” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size	100 × 21 mm (3.94 × 0.84 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	4: 1 outer edge and 3 cut-outs
Cut length	518 mm at this size
Narrowest part	1.8 mm at this size
Nodes	274 curve and line segments

Measured from the file. PNG: 2,000 × 487 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.21 in (25 × 5 mm)	0.46 mm	132 mm	290	Too fine for most machines
2 × 0.43 in (51 × 11 mm)	0.91 mm	263 mm	95	Fine detail: vinyl and paper only, weed with care
3 × 0.64 in (76 × 16 mm)	1.4 mm	395 mm	42	Vinyl, card and thin sheet
4 × 0.85 in (102 × 22 mm)	1.8 mm	526 mm	22	Vinyl, card and thin sheet
6 × 1.28 in (152 × 32 mm)	2.7 mm	789 mm	8	Vinyl, card and thin sheet
8 × 1.7 in (203 × 43 mm)	3.7 mm	1,053 mm	6	Any material, including 3 mm wood and acrylic
12 × 2.56 in (305 × 65 mm)	5.5 mm	1,579 mm	4	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Kwanzaa SVG files

← Kwanzaa with a drop shadow All 12 Kwanzaa designs Kwanzaa in Lobster →