Kwanzaa with a swash underline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Kwanzaa” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.
What is in the file
| Size | 100 × 28 mm (3.94 × 1.09 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 707 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 240 curve and line segments |
Measured from the file. PNG: 2,000 × 610 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.28 in (25 × 7 mm) | 0.3 mm | 180 mm | 250 | Too fine for most machines |
| 2 × 0.55 in (51 × 14 mm) | 0.61 mm | 359 mm | 80 | Fine detail: vinyl and paper only, weed with care |
| 3 × 0.83 in (76 × 21 mm) | 0.91 mm | 539 mm | 33 | Fine detail: vinyl and paper only, weed with care |
| 4 × 1.11 in (102 × 28 mm) | 1.2 mm | 718 mm | 18 | Vinyl, card and thin sheet |
| 6 × 1.66 in (152 × 42 mm) | 1.8 mm | 1,077 mm | 6 | Vinyl, card and thin sheet |
| 8 × 2.22 in (203 × 56 mm) | 2.4 mm | 1,437 mm | 5 | Vinyl, card and thin sheet |
| 12 × 3.32 in (305 × 84 mm) | 3.7 mm | 2,155 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Kwanzaa SVG files
-
Kwanzaa with stars Solid · 11 pieces
-
Kwanzaa outline lettering Outline · 7 pieces
-
Kwanzaa stencil plate Solid · one piece
-
Kwanzaa with a drop shadow Layered · 2 pieces
-
Kwanzaa with three candles Solid · 6 pieces
-
Kwanzaa in Pacifico Solid · one piece
-
Kwanzaa in Lobster Solid · 5 pieces
-
Kwanzaa in Kaushan Script Solid · 8 pieces
← Kwanzaa in block capitals All 13 Kwanzaa designs Kwanzaa with stars →