Free Kwanzaa SVG

Kwanzaa with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Kwanzaa with stars, as a solid black shape — Kwanzaa with stars. The preview is the SVG file itself.

“Kwanzaa” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size	100 × 52 mm (3.94 × 2.06 in), scales to any size
Pieces	11 separate pieces
Outlines to cut	14: 11 outer edges and 3 cut-outs
Cut length	822 mm at this size
Narrowest part	1 mm at this size
Nodes	296 curve and line segments

Measured from the file. PNG: 2,000 × 1,083 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.52 in (25 × 13 mm)	0.25 mm	209 mm	160	Too fine for most machines
2 × 1.05 in (51 × 27 mm)	0.51 mm	418 mm	45	Fine detail: vinyl and paper only, weed with care
3 × 1.57 in (76 × 40 mm)	0.76 mm	626 mm	18	Fine detail: vinyl and paper only, weed with care
4 × 2.09 in (102 × 53 mm)	1 mm	835 mm	10	Vinyl, card and thin sheet
6 × 3.14 in (152 × 80 mm)	1.5 mm	1,253 mm	3	Vinyl, card and thin sheet
8 × 4.18 in (203 × 106 mm)	2 mm	1,670 mm	2	Vinyl, card and thin sheet
12 × 6.28 in (305 × 159 mm)	3 mm	2,505 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Kwanzaa SVG files

← Kwanzaa with a swash underline All 12 Kwanzaa designs Kwanzaa outline lettering →