Kwanzaa in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Kwanzaa” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 19 mm (3.94 × 0.73 in), scales to any size |
|---|---|
| Pieces | 7 separate pieces |
| Outlines to cut | 10: 7 outer edges and 3 cut-outs |
| Cut length | 485 mm at this size |
| Narrowest part | 3.2 mm at this size |
| Nodes | 175 curve and line segments |
Measured from the file. PNG: 2,000 × 433 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.19 in (25 × 5 mm) | 0.81 mm | 123 mm | 310 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.37 in (51 × 9 mm) | 1.6 mm | 246 mm | 105 | Vinyl, card and thin sheet |
| 3 × 0.55 in (76 × 14 mm) | 2.4 mm | 370 mm | 48 | Vinyl, card and thin sheet |
| 4 × 0.74 in (102 × 19 mm) | 3.3 mm | 493 mm | 24 | Any material, including 3 mm wood and acrylic |
| 6 × 1.11 in (152 × 28 mm) | 4.9 mm | 739 mm | 9 | Any material, including 3 mm wood and acrylic |
| 8 × 1.48 in (203 × 38 mm) | 6.5 mm | 986 mm | 7 | Any material, including 3 mm wood and acrylic |
| 12 × 2.22 in (305 × 56 mm) | 9.8 mm | 1,478 mm | 5 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Kwanzaa SVG files
-
Kwanzaa in Alfa Slab One Solid · 7 pieces -
Kwanzaa in Amatic SC Solid · 7 pieces -
Kwanzaa in block capitals Solid · 7 pieces -
Kwanzaa with a swash underline Solid · one piece -
Kwanzaa with stars Solid · 11 pieces -
Kwanzaa outline lettering Outline · 7 pieces -
Kwanzaa stencil plate Solid · one piece -
Kwanzaa with a drop shadow Layered · 2 pieces
← Kwanzaa in Kaushan Script All 12 Kwanzaa designs Kwanzaa in Alfa Slab One →