Kwanzaa in Amatic SC SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Kwanzaa” set in Amatic SC, narrow hand-drawn capitals. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.
What is in the file
| Size | 100 × 33 mm (3.94 × 1.29 in), scales to any size |
|---|---|
| Pieces | 7 separate pieces |
| Outlines to cut | 10: 7 outer edges and 3 cut-outs |
| Cut length | 914 mm at this size |
| Narrowest part | 1.8 mm at this size |
| Nodes | 320 curve and line segments |
Measured from the file. PNG: 2,000 × 708 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.33 in (25 × 8 mm) | 0.46 mm | 232 mm | 230 | Too fine for most machines |
| 2 × 0.66 in (51 × 17 mm) | 0.91 mm | 464 mm | 70 | Fine detail: vinyl and paper only, weed with care |
| 3 × 0.98 in (76 × 25 mm) | 1.4 mm | 696 mm | 30 | Vinyl, card and thin sheet |
| 4 × 1.31 in (102 × 33 mm) | 1.8 mm | 929 mm | 16 | Vinyl, card and thin sheet |
| 6 × 1.97 in (152 × 50 mm) | 2.7 mm | 1,393 mm | 5 | Vinyl, card and thin sheet |
| 8 × 2.62 in (203 × 67 mm) | 3.7 mm | 1,857 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 3.94 in (305 × 100 mm) | 5.5 mm | 2,786 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Kwanzaa SVG files
-
Kwanzaa in block capitals Solid · 7 pieces -
Kwanzaa with a swash underline Solid · one piece -
Kwanzaa with stars Solid · 11 pieces -
Kwanzaa outline lettering Outline · 7 pieces -
Kwanzaa stencil plate Solid · one piece -
Kwanzaa with a drop shadow Layered · 2 pieces -
Kwanzaa in Pacifico Solid · one piece -
Kwanzaa in Lobster Solid · 5 pieces
← Kwanzaa in Alfa Slab One All 12 Kwanzaa designs Kwanzaa in block capitals →