Free Kwanzaa SVG

Kwanzaa in block capitals SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Kwanzaa in block capitals, as a solid black shape — Kwanzaa in block capitals. The preview is the SVG file itself.

“KWANZAA” in the tall, narrow capitals of Bebas Neue. Each letter is a separate piece with thick, even strokes.

What is in the file

Size	100 × 24 mm (3.94 × 0.95 in), scales to any size
Pieces	7 separate pieces
Outlines to cut	10: 7 outer edges and 3 cut-outs
Cut length	810 mm at this size
Narrowest part	2.7 mm at this size
Nodes	89 curve and line segments

Measured from the file. PNG: 2,000 × 540 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.24 in (25 × 6 mm)	0.69 mm	206 mm	270	Fine detail: vinyl and paper only, weed with care
2 × 0.48 in (51 × 12 mm)	1.4 mm	411 mm	85	Vinyl, card and thin sheet
3 × 0.72 in (76 × 18 mm)	2.1 mm	617 mm	39	Vinyl, card and thin sheet
4 × 0.96 in (102 × 24 mm)	2.7 mm	823 mm	20	Vinyl, card and thin sheet
6 × 1.45 in (152 × 37 mm)	4.1 mm	1,234 mm	7	Any material, including 3 mm wood and acrylic
8 × 1.93 in (203 × 49 mm)	5.5 mm	1,646 mm	5	Any material, including 3 mm wood and acrylic
12 × 2.89 in (305 × 73 mm)	8.2 mm	2,469 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Kwanzaa SVG files

← Kwanzaa in Amatic SC All 12 Kwanzaa designs Kwanzaa with a swash underline →