Free I’m Just Here for the Boos SVG

Here for the Boos in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Here for the Boos in Lobster, as a solid black shape
Here for the Boos in Lobster. The preview is the SVG file itself.

“I’m Just Here for the Boos” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 46 mm (3.94 × 1.8 in), scales to any size
Pieces11 separate pieces
Outlines to cut23: 11 outer edges and 12 cut-outs
Cut length1,025 mm at this size
Narrowest part1 mm at this size
Nodes564 curve and line segments

Measured from the file. PNG: 2,000 × 956 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.46 in (25 × 12 mm)0.25 mm260 mm180Too fine for most machines
2 × 0.91 in (51 × 23 mm)0.51 mm521 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.37 in (76 × 35 mm)0.76 mm781 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.83 in (102 × 46 mm)1 mm1,041 mm12Vinyl, card and thin sheet
6 × 2.74 in (152 × 70 mm)1.5 mm1,562 mm4Vinyl, card and thin sheet
8 × 3.66 in (203 × 93 mm)2 mm2,083 mm3Vinyl, card and thin sheet
12 × 5.48 in (305 × 139 mm)3 mm3,124 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I’m Just Here for the Boos SVG files

← Here for the Boos in Pacifico All 13 I’m Just Here for the Boos designs Here for the Boos in Kaushan Script →