Free I’m Just Here for the Boos SVG

Here for the Boos in script and capitals SVG

Here for the Boos in script and capitals, as a solid black shape
Here for the Boos in script and capitals. The preview is the SVG file itself.

“I’m Just Here” in Pacifico script over “FOR THE BOOS” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 41 mm (3.94 × 1.61 in), scales to any size
Pieces17 separate pieces
Outlines to cut28: 17 outer edges and 11 cut-outs
Cut length1,223 mm at this size
Narrowest part0.9 mm at this size
Nodes397 curve and line segments

Measured from the file. PNG: 2,000 × 862 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.41 in (25 × 10 mm)0.23 mm311 mm200Too fine for most machines
2 × 0.82 in (51 × 21 mm)0.46 mm621 mm60Too fine for most machines
3 × 1.22 in (76 × 31 mm)0.69 mm932 mm24Fine detail: vinyl and paper only, weed with care
4 × 1.63 in (102 × 41 mm)0.91 mm1,243 mm12Fine detail: vinyl and paper only, weed with care
6 × 2.45 in (152 × 62 mm)1.4 mm1,864 mm4Vinyl, card and thin sheet
8 × 3.26 in (203 × 83 mm)1.8 mm2,485 mm3Vinyl, card and thin sheet
12 × 4.9 in (305 × 124 mm)2.7 mm3,728 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I’m Just Here for the Boos SVG files

← Here for the Boos in block capitals All 12 I’m Just Here for the Boos designs Here for the Boos with stars →