Free I’m Just Here for the Boos SVG

Here for the Boos in Kaushan Script SVG

Here for the Boos in Kaushan Script, as a solid black shape
Here for the Boos in Kaushan Script. The preview is the SVG file itself.

“I’m Just Here for the Boos” set in Kaushan Script, a lively brush script, on 2 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 44 mm (3.94 × 1.72 in), scales to any size
Pieces21 separate pieces
Outlines to cut31: 21 outer edges and 10 cut-outs
Cut length1,072 mm at this size
Narrowest part0.7 mm at this size
Nodes654 curve and line segments

Measured from the file. PNG: 2,000 × 915 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.44 in (25 × 11 mm)0.18 mm272 mm190Too fine for most machines
2 × 0.87 in (51 × 22 mm)0.36 mm545 mm55Too fine for most machines
3 × 1.31 in (76 × 33 mm)0.53 mm817 mm24Fine detail: vinyl and paper only, weed with care
4 × 1.74 in (102 × 44 mm)0.71 mm1,089 mm12Fine detail: vinyl and paper only, weed with care
6 × 2.62 in (152 × 66 mm)1.1 mm1,634 mm4Vinyl, card and thin sheet
8 × 3.49 in (203 × 89 mm)1.4 mm2,178 mm3Vinyl, card and thin sheet
12 × 5.23 in (305 × 133 mm)2.1 mm3,267 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I’m Just Here for the Boos SVG files

← Here for the Boos in Lobster All 12 I’m Just Here for the Boos designs Here for the Boos in Lilita One →