Free I’m Just Here for the Boos SVG

Here for the Boos in Lilita One SVG

Here for the Boos in Lilita One, as a solid black shape
Here for the Boos in Lilita One. The preview is the SVG file itself.

“I’m Just Here for the Boos” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 32 mm (3.94 × 1.25 in), scales to any size
Pieces21 separate pieces
Outlines to cut29: 21 outer edges and 8 cut-outs
Cut length829 mm at this size
Narrowest part2.4 mm at this size
Nodes413 curve and line segments

Measured from the file. PNG: 2,000 × 687 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.32 in (25 × 8 mm)0.61 mm211 mm230Fine detail: vinyl and paper only, weed with care
2 × 0.63 in (51 × 16 mm)1.2 mm421 mm70Vinyl, card and thin sheet
3 × 0.95 in (76 × 24 mm)1.8 mm632 mm30Vinyl, card and thin sheet
4 × 1.27 in (102 × 32 mm)2.4 mm842 mm16Vinyl, card and thin sheet
6 × 1.9 in (152 × 48 mm)3.7 mm1,263 mm5Any material, including 3 mm wood and acrylic
8 × 2.54 in (203 × 64 mm)4.9 mm1,685 mm4Any material, including 3 mm wood and acrylic
12 × 3.8 in (305 × 97 mm)7.3 mm2,527 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I’m Just Here for the Boos SVG files

← Here for the Boos in Kaushan Script All 12 I’m Just Here for the Boos designs Here for the Boos in Alfa Slab One →