Free I’m Just Here for the Boos SVG

Here for the Boos outline lettering SVG

Here for the Boos outline lettering, drawn as a line
Here for the Boos outline lettering. The preview is the SVG file itself.

“I’m Just Here for the Boos” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 30 mm (3.94 × 1.17 in), scales to any size
Pieces24 separate pieces
Outlines to cut58: 24 outer edges and 34 cut-outs
Cut length1,362 mm at this size
Narrowest part0.8 mm at this size
Nodes601 curve and line segments

Measured from the file. PNG: 2,000 × 650 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.3 in (25 × 8 mm)0.2 mm346 mm240Too fine for most machines
2 × 0.6 in (51 × 15 mm)0.41 mm692 mm75Too fine for most machines
3 × 0.89 in (76 × 23 mm)0.61 mm1,038 mm33Fine detail: vinyl and paper only, weed with care
4 × 1.19 in (102 × 30 mm)0.81 mm1,384 mm16Fine detail: vinyl and paper only, weed with care
6 × 1.79 in (152 × 45 mm)1.2 mm2,076 mm6Vinyl, card and thin sheet
8 × 2.38 in (203 × 61 mm)1.6 mm2,768 mm4Vinyl, card and thin sheet
12 × 3.58 in (305 × 91 mm)2.4 mm4,151 mm3Vinyl, card and thin sheet

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I’m Just Here for the Boos SVG files

← Here for the Boos with stars All 12 I’m Just Here for the Boos designs Here for the Boos stencil plate →