Free I’m Just Here for the Boos SVG

Here for the Boos in Pacifico SVG

Here for the Boos in Pacifico, as a solid black shape
Here for the Boos in Pacifico. The preview is the SVG file itself.

“I’m Just Here for the Boos” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 46 mm (3.94 × 1.81 in), scales to any size
Pieces10 separate pieces
Outlines to cut26: 10 outer edges and 16 cut-outs
Cut length918 mm at this size
Narrowest part1.5 mm at this size
Nodes645 curve and line segments

Measured from the file. PNG: 2,000 × 960 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.46 in (25 × 12 mm)0.38 mm233 mm180Too fine for most machines
2 × 0.92 in (51 × 23 mm)0.76 mm466 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.38 in (76 × 35 mm)1.1 mm700 mm21Vinyl, card and thin sheet
4 × 1.84 in (102 × 47 mm)1.5 mm933 mm10Vinyl, card and thin sheet
6 × 2.75 in (152 × 70 mm)2.3 mm1,399 mm4Vinyl, card and thin sheet
8 × 3.67 in (203 × 93 mm)3 mm1,865 mm3Any material, including 3 mm wood and acrylic
12 × 5.51 in (305 × 140 mm)4.6 mm2,798 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More I’m Just Here for the Boos SVG files

← Here for the Boos with a drop shadow All 12 I’m Just Here for the Boos designs Here for the Boos in Lobster →