Free ice cream SVG

Chocolate-dipped ice cream bar SVG

Chocolate-dipped ice cream bar, as a solid black shape — Chocolate-dipped ice cream bar. The preview is the SVG file itself.

An ice cream bar on a stick with a wavy cut line where the chocolate coating ends and nuts scattered over it. A bite is missing from the top.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	44 × 100 mm (1.73 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	478 mm at this size
Narrowest part	3.4 mm at this size
Nodes	196 curve and line segments

Measured from the file. PNG: 923 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.44 × 1 in (11 × 25 mm)	0.86 mm	121 mm	190	Fine detail: vinyl and paper only, weed with care
0.88 × 2 in (22 × 51 mm)	1.7 mm	243 mm	55	Vinyl, card and thin sheet
1.32 × 3 in (34 × 76 mm)	2.6 mm	364 mm	24	Vinyl, card and thin sheet
1.76 × 4 in (45 × 102 mm)	3.5 mm	486 mm	12	Any material, including 3 mm wood and acrylic
2.64 × 6 in (67 × 152 mm)	5.2 mm	728 mm	4	Any material, including 3 mm wood and acrylic
3.52 × 8 in (89 × 203 mm)	6.9 mm	971 mm	3	Any material, including 3 mm wood and acrylic
5.28 × 12 in (134 × 305 mm)	10 mm	1,457 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ice cream SVG files

← Popsicle on a stick All 17 ice creams Snow cone →