Free ice cream SVG

Snow cone SVG

Snow cone, as a solid black shape — Snow cone. The preview is the SVG file itself.

A paper cone with a slanted stripe, heaped with a dome of shaved ice. The ice is speckled with small holes and set off from the paper by a cut line.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	67 × 100 mm (2.63 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	512 mm at this size
Narrowest part	2 mm at this size
Nodes	69 curve and line segments

Measured from the file. PNG: 1,360 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.67 × 1 in (17 × 25 mm)	0.51 mm	130 mm	140	Fine detail: vinyl and paper only, weed with care
1.33 × 2 in (34 × 51 mm)	1 mm	260 mm	35	Vinyl, card and thin sheet
2 × 3 in (51 × 76 mm)	1.5 mm	390 mm	15	Vinyl, card and thin sheet
2.67 × 4 in (68 × 102 mm)	2 mm	520 mm	8	Vinyl, card and thin sheet
4 × 6 in (102 × 152 mm)	3 mm	780 mm	2	Any material, including 3 mm wood and acrylic
5.34 × 8 in (136 × 203 mm)	4.1 mm	1,040 mm	2	Any material, including 3 mm wood and acrylic
8 × 12 in (203 × 305 mm)	6.1 mm	1,561 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ice cream SVG files

← Chocolate-dipped ice cream bar All 17 ice creams Ice cream monogram frame →