Free ice cream SVG

Ice cream cone with two scoops SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Ice cream cone with two scoops, as a solid black shape
Ice cream cone with two scoops. The preview is the SVG file itself.

Two scoops and a cherry on a waffle cone. Each scoop has a ruffled lower edge and a glint, and the waffle is a grid of small diamonds cut from the cone.

What is in the file

Size39 × 100 mm (1.52 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut17: 1 outer edge and 16 cut-outs
Cut length536 mm at this size
Narrowest part1 mm at this size
Nodes127 curve and line segments

Measured from the file. PNG: 819 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.39 × 1 in (10 × 25 mm)0.25 mm136 mm200Too fine for most machines
0.77 × 2 in (20 × 51 mm)0.51 mm272 mm60Fine detail: vinyl and paper only, weed with care
1.16 × 3 in (29 × 76 mm)0.76 mm408 mm24Fine detail: vinyl and paper only, weed with care
1.54 × 4 in (39 × 102 mm)1 mm545 mm12Vinyl, card and thin sheet
2.32 × 6 in (59 × 152 mm)1.5 mm817 mm4Vinyl, card and thin sheet
3.09 × 8 in (78 × 203 mm)2 mm1,089 mm3Vinyl, card and thin sheet
4.63 × 12 in (118 × 305 mm)3 mm1,634 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ice cream SVG files

← Layered ice cream cone in four colours All 17 ice creams Ice cream cone with one scoop →