Free ice cream SVG

Layered ice cream cone in four colours SVG

Layered ice cream cone in four colours, in layered colours
Layered ice cream cone in four colours. The preview is the SVG file itself.

Four layers to stack: a waffle cone, a pink scoop, a mint scoop above it and a red cherry. Each scoop overlaps the layer below, so nothing has to line up exactly.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size38 × 100 mm (1.51 × 3.94 in), scales to any size
Pieces4 separate pieces
Outlines to cut14: 4 outer edges and 10 cut-outs
Cut length623 mm at this size
Narrowest part2.2 mm at this size
Nodes108 curve and line segments
Layers4: cone, lower scoop, upper scoop and cherry

Measured from the file. PNG: 815 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.38 × 1 in (10 × 25 mm)0.56 mm158 mm200Fine detail: vinyl and paper only, weed with care
0.77 × 2 in (20 × 51 mm)1.1 mm316 mm60Vinyl, card and thin sheet
1.15 × 3 in (29 × 76 mm)1.7 mm475 mm27Vinyl, card and thin sheet
1.54 × 4 in (39 × 102 mm)2.2 mm633 mm14Vinyl, card and thin sheet
2.3 × 6 in (59 × 152 mm)3.4 mm949 mm4Any material, including 3 mm wood and acrylic
3.07 × 8 in (78 × 203 mm)4.5 mm1,266 mm3Any material, including 3 mm wood and acrylic
4.61 × 12 in (117 × 305 mm)6.7 mm1,899 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ice cream SVG files

← Three ice cream cones All 17 ice creams Ice cream cone with two scoops →