Free ice cream SVG

Ice cream cone outline SVG

Ice cream cone outline, drawn as a line — Ice cream cone outline. The preview is the SVG file itself.

A cone with two scoops drawn as a line about 2.3 mm wide, with three crossing lines for the waffle. For colouring pages, menus and pen plotting.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	45 × 100 mm (1.78 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	8: 1 outer edge and 7 cut-outs
Cut length	772 mm at this size
Narrowest part	1.8 mm at this size
Nodes	171 curve and line segments

Measured from the file. PNG: 944 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.45 × 1 in (11 × 25 mm)	0.46 mm	196 mm	180	Too fine for most machines
0.9 × 2 in (23 × 51 mm)	0.91 mm	392 mm	55	Fine detail: vinyl and paper only, weed with care
1.35 × 3 in (34 × 76 mm)	1.4 mm	588 mm	21	Vinyl, card and thin sheet
1.8 × 4 in (46 × 102 mm)	1.8 mm	784 mm	12	Vinyl, card and thin sheet
2.71 × 6 in (69 × 152 mm)	2.7 mm	1,177 mm	4	Vinyl, card and thin sheet
3.61 × 8 in (92 × 203 mm)	3.7 mm	1,569 mm	3	Any material, including 3 mm wood and acrylic
5.41 × 12 in (137 × 305 mm)	5.5 mm	2,353 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ice cream SVG files

← Ice cream cone silhouette All 17 ice creams Soft-serve ice cream cone →