Free ice cream SVG

Popsicle on a stick SVG

Popsicle on a stick, as a solid black shape
Popsicle on a stick. The preview is the SVG file itself.

The classic ice lolly: a block with a rounded top, two grooves down its face and a bite out of one corner, on a flat wooden stick.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size40 × 100 mm (1.57 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length458 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes30 curve and line segments

Measured from the file. PNG: 846 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.4 × 1 in (10 × 25 mm)Over 1.5 mm116 mm200Vinyl, card and thin sheet
0.8 × 2 in (20 × 51 mm)Over 3 mm233 mm60Any material, including 3 mm wood and acrylic
1.2 × 3 in (30 × 76 mm)Over 4.6 mm349 mm24Any material, including 3 mm wood and acrylic
1.6 × 4 in (41 × 102 mm)Over 6.1 mm465 mm12Any material, including 3 mm wood and acrylic
2.4 × 6 in (61 × 152 mm)Over 9.1 mm698 mm4Any material, including 3 mm wood and acrylic
3.2 × 8 in (81 × 203 mm)Over 12 mm931 mm3Any material, including 3 mm wood and acrylic
4.8 × 12 in (122 × 305 mm)Over 18 mm1,396 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ice cream SVG files

← Milkshake with cream and a cherry All 17 ice creams Chocolate-dipped ice cream bar →