Holly corner SVG
Two short branches at a right angle with a cluster of berries where they meet. Put one in each corner of a card, a frame or a chalkboard sign, turning it a quarter each time.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 100 mm (3.94 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 12: 1 outer edge and 11 cut-outs |
| Cut length | 921 mm at this size |
| Narrowest part | 2.2 mm at this size |
| Nodes | 508 curve and line segments |
Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 1 in (25 × 25 mm) | 0.56 mm | 234 mm | 100 | Fine detail: vinyl and paper only, weed with care |
| 2 × 2 in (51 × 51 mm) | 1.1 mm | 468 mm | 25 | Vinyl, card and thin sheet |
| 3 × 3 in (76 × 76 mm) | 1.7 mm | 702 mm | 9 | Vinyl, card and thin sheet |
| 4 × 4 in (102 × 102 mm) | 2.2 mm | 936 mm | 4 | Vinyl, card and thin sheet |
| 6 × 6 in (152 × 152 mm) | 3.4 mm | 1,404 mm | 1 | Any material, including 3 mm wood and acrylic |
| 8 × 8 in (203 × 203 mm) | 4.5 mm | 1,871 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 12 in (305 × 305 mm) | 6.7 mm | 2,807 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Holly swag 
Holly outline 
Holly in two colours 
Holly sprig with a bow 
Hanging holly sprig 
Simple holly for small cuts 
Holly divider 
Vintage holly spray 