Free holly SVG

Holly divider SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Holly divider, as a solid black shape
Holly divider. The preview is the SVG file itself.

A small sprig in the middle of two tapering lines, to rule off a heading, a menu or the verse inside a card. The lines and the sprig are joined, so it lifts in one go.

What is in the file

Size100 × 31 mm (3.94 × 1.23 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length439 mm at this size
Narrowest part2.1 mm at this size
Nodes187 curve and line segments

Measured from the file. PNG: 2,000 × 677 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.31 in (25 × 8 mm)0.53 mm112 mm230Fine detail: vinyl and paper only, weed with care
2 × 0.62 in (51 × 16 mm)1.1 mm223 mm70Vinyl, card and thin sheet
3 × 0.94 in (76 × 24 mm)1.6 mm335 mm30Vinyl, card and thin sheet
4 × 1.25 in (102 × 32 mm)2.1 mm446 mm16Vinyl, card and thin sheet
6 × 1.87 in (152 × 48 mm)3.2 mm669 mm5Any material, including 3 mm wood and acrylic
8 × 2.5 in (203 × 63 mm)4.3 mm892 mm4Any material, including 3 mm wood and acrylic
12 × 3.74 in (305 × 95 mm)6.4 mm1,338 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More holly SVG files

← Simple holly for small cuts All 17 holly sprigs Vintage holly spray →