Free holly SVG

Holly sprig with three leaves SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Holly sprig with three leaves, as a solid black shape
Holly sprig with three leaves. The preview is the SVG file itself.

Three leaves fanned out, one upright and one to each side, with three berries at the centre. The fuller sprig for the top of a card, a gift tag or a place setting.

What is in the file

Size100 × 84 mm (3.94 × 3.3 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length693 mm at this size
Narrowest part2.9 mm at this size
Nodes291 curve and line segments
Also found asHolly leaves and berries SVG

Measured from the file. PNG: 2,000 × 1,688 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.84 in (25 × 21 mm)0.74 mm176 mm110Fine detail: vinyl and paper only, weed with care
2 × 1.68 in (51 × 43 mm)1.5 mm352 mm30Vinyl, card and thin sheet
3 × 2.51 in (76 × 64 mm)2.2 mm528 mm12Vinyl, card and thin sheet
4 × 3.35 in (102 × 85 mm)2.9 mm704 mm6Vinyl, card and thin sheet
6 × 5.03 in (152 × 128 mm)4.4 mm1,056 mm2Any material, including 3 mm wood and acrylic
8 × 6.7 in (203 × 170 mm)5.9 mm1,408 mm1Any material, including 3 mm wood and acrylic
12 × 10.06 in (305 × 255 mm)8.8 mm2,112 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More holly SVG files

← Classic holly sprig All 17 holly sprigs Single holly leaf →