Holly border SVG
A straight run of leaves pointing alternately up and down along a stem, with a berry at each joint. Repeat it end to end for a longer edge along a card, a tray or a shelf.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 41 mm (3.94 × 1.61 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 660 mm at this size |
| Narrowest part | 2.6 mm at this size |
| Nodes | 347 curve and line segments |
Measured from the file. PNG: 2,000 × 863 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.41 in (25 × 10 mm) | 0.66 mm | 168 mm | 200 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.82 in (51 × 21 mm) | 1.3 mm | 335 mm | 55 | Vinyl, card and thin sheet |
| 3 × 1.23 in (76 × 31 mm) | 2 mm | 503 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.64 in (102 × 42 mm) | 2.6 mm | 671 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.45 in (152 × 62 mm) | 4 mm | 1,006 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.27 in (203 × 83 mm) | 5.3 mm | 1,341 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.91 in (305 × 125 mm) | 7.9 mm | 2,012 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Holly corner 
Holly swag 
Holly outline 
Holly in two colours 
Holly sprig with a bow 
Hanging holly sprig 
Simple holly for small cuts 
Holly divider 