Free holly SVG

Holly sprig with a bow SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Holly sprig with a bow, as a solid black shape
Holly sprig with a bow. The preview is the SVG file itself.

Two leaves and three berries tied with a ribbon bow whose tails hang below. A ready-made topper for a gift box, a wine bottle tag or a stocking name plate.

What is in the file

Size96 × 100 mm (3.8 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length964 mm at this size
Narrowest part1.7 mm at this size
Nodes317 curve and line segments

Measured from the file. PNG: 1,931 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.96 × 1 in (24 × 25 mm)0.43 mm245 mm100Too fine for most machines
1.93 × 2 in (49 × 51 mm)0.86 mm490 mm25Fine detail: vinyl and paper only, weed with care
2.89 × 3 in (73 × 76 mm)1.3 mm735 mm9Vinyl, card and thin sheet
3.86 × 4 in (98 × 102 mm)1.7 mm979 mm6Vinyl, card and thin sheet
5.78 × 6 in (147 × 152 mm)2.6 mm1,469 mm2Vinyl, card and thin sheet
7.71 × 8 in (196 × 203 mm)3.5 mm1,959 mm1Any material, including 3 mm wood and acrylic
11.57 × 12 in (294 × 305 mm)5.2 mm2,938 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More holly SVG files

← Holly in two colours All 17 holly sprigs Hanging holly sprig →