Free holly SVG

Holly in two colours SVG

Holly in two colours, in layered colours
Holly in two colours. The preview is the SVG file itself.

A sprig split into a green layer of two leaves and a red layer of three berries. Cut each from its own colour and stick the berries on the round patch where the leaves meet.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size84 × 100 mm (3.29 × 3.94 in), scales to any size
Pieces2 separate pieces
Outlines to cut9: 2 outer edges and 7 cut-outs
Cut length641 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes200 curve and line segments
Layers2: leaves and berries

Measured from the file. PNG: 1,683 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.84 × 1 in (21 × 25 mm)Over 1.5 mm163 mm110Vinyl, card and thin sheet
1.67 × 2 in (42 × 51 mm)Over 3 mm326 mm30Any material, including 3 mm wood and acrylic
2.51 × 3 in (64 × 76 mm)Over 4.6 mm488 mm12Any material, including 3 mm wood and acrylic
3.34 × 4 in (85 × 102 mm)Over 6.1 mm651 mm6Any material, including 3 mm wood and acrylic
5.01 × 6 in (127 × 152 mm)Over 9.1 mm977 mm2Any material, including 3 mm wood and acrylic
6.68 × 8 in (170 × 203 mm)Over 12 mm1,303 mm1Any material, including 3 mm wood and acrylic
10.02 × 12 in (255 × 305 mm)Over 18 mm1,954 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More holly SVG files

← Holly outline All 17 holly sprigs Holly sprig with a bow →