Free holly SVG

Hanging holly sprig SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Hanging holly sprig, as a solid black shape
Hanging holly sprig. The preview is the SVG file itself.

Three leaves pointing down from a stalk with a ring to hang it by and berries at the top. Cut it from card or thin wood and hang it from a door handle, a tree or a parcel.

What is in the file

Size61 × 100 mm (2.38 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut10: 1 outer edge and 9 cut-outs
Cut length707 mm at this size
Narrowest part2.6 mm at this size
Nodes330 curve and line segments
Also found asHolly with berries SVG

Measured from the file. PNG: 1,240 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.61 × 1 in (15 × 25 mm)0.66 mm180 mm150Fine detail: vinyl and paper only, weed with care
1.21 × 2 in (31 × 51 mm)1.3 mm359 mm40Vinyl, card and thin sheet
1.81 × 3 in (46 × 76 mm)2 mm539 mm18Vinyl, card and thin sheet
2.42 × 4 in (61 × 102 mm)2.6 mm718 mm8Vinyl, card and thin sheet
3.63 × 6 in (92 × 152 mm)4 mm1,077 mm3Any material, including 3 mm wood and acrylic
4.84 × 8 in (123 × 203 mm)5.3 mm1,437 mm2Any material, including 3 mm wood and acrylic
7.26 × 12 in (184 × 305 mm)7.9 mm2,155 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More holly SVG files

← Holly sprig with a bow All 17 holly sprigs Simple holly for small cuts →