Free Happy Place SVG

Happy Place outline lettering SVG

Happy Place outline lettering, drawn as a line — Happy Place outline lettering. The preview is the SVG file itself.

“Happy Place” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 63 mm (3.94 × 2.48 in), scales to any size
Pieces	16 separate pieces
Outlines to cut	32: 16 outer edges and 16 cut-outs
Cut length	1,631 mm at this size
Narrowest part	1.4 mm at this size
Nodes	420 curve and line segments

Measured from the file. PNG: 2,000 × 1,288 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.63 in (25 × 16 mm)	0.36 mm	414 mm	140	Too fine for most machines
2 × 1.26 in (51 × 32 mm)	0.71 mm	829 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.89 in (76 × 48 mm)	1.1 mm	1,243 mm	15	Vinyl, card and thin sheet
4 × 2.52 in (102 × 64 mm)	1.4 mm	1,657 mm	8	Vinyl, card and thin sheet
6 × 3.78 in (152 × 96 mm)	2.1 mm	2,486 mm	3	Vinyl, card and thin sheet
8 × 5.04 in (203 × 128 mm)	2.8 mm	3,314 mm	2	Vinyl, card and thin sheet
12 × 7.56 in (305 × 192 mm)	4.3 mm	4,971 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Place SVG files

← Happy Place with hearts All 12 Happy Place designs Happy Place stencil plate →