Free Happy Place SVG

Happy Place with hearts SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Happy Place with hearts, as a solid black shape
Happy Place with hearts. The preview is the SVG file itself.

“Happy Place” in Lobster with a row of three hearts above the words and three below, the middle one larger. The hearts are loose pieces, spaced to the width of the lettering.

What is in the file

Size89 × 100 mm (3.49 × 3.94 in), scales to any size
Pieces12 separate pieces
Outlines to cut18: 12 outer edges and 6 cut-outs
Cut length1,201 mm at this size
Narrowest part1.3 mm at this size
Nodes262 curve and line segments

Measured from the file. PNG: 1,781 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.89 × 1 in (23 × 25 mm)0.33 mm305 mm110Too fine for most machines
1.77 × 2 in (45 × 51 mm)0.66 mm610 mm30Fine detail: vinyl and paper only, weed with care
2.66 × 3 in (68 × 76 mm)0.99 mm915 mm12Fine detail: vinyl and paper only, weed with care
3.54 × 4 in (90 × 102 mm)1.3 mm1,220 mm6Vinyl, card and thin sheet
5.32 × 6 in (135 × 152 mm)2 mm1,830 mm2Vinyl, card and thin sheet
7.09 × 8 in (180 × 203 mm)2.6 mm2,440 mm1Vinyl, card and thin sheet
10.63 × 12 in (270 × 305 mm)4 mm3,661 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Place SVG files

← Happy Place in script and capitals All 13 Happy Place designs Happy Place outline lettering →