Free Happy Place SVG

Happy Place in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Happy Place in Pacifico, as a solid black shape
Happy Place in Pacifico. The preview is the SVG file itself.

“Happy Place” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 91 mm (3.94 × 3.59 in), scales to any size
Pieces3 separate pieces
Outlines to cut14: 3 outer edges and 11 cut-outs
Cut length1,242 mm at this size
Narrowest part2.1 mm at this size
Nodes315 curve and line segments

Measured from the file. PNG: 2,000 × 1,831 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.91 in (25 × 23 mm)0.53 mm315 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.82 in (51 × 46 mm)1.1 mm631 mm30Vinyl, card and thin sheet
3 × 2.74 in (76 × 69 mm)1.6 mm946 mm12Vinyl, card and thin sheet
4 × 3.65 in (102 × 93 mm)2.1 mm1,262 mm6Vinyl, card and thin sheet
6 × 5.47 in (152 × 139 mm)3.2 mm1,893 mm2Any material, including 3 mm wood and acrylic
8 × 7.3 in (203 × 185 mm)4.3 mm2,524 mm1Any material, including 3 mm wood and acrylic
12 × 10.94 in (305 × 278 mm)6.4 mm3,786 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Place SVG files

← Happy Place with a sun All 13 Happy Place designs Happy Place in Lobster →