Free Happy Place SVG

Happy Place in script and capitals SVG

Happy Place in script and capitals, as a solid black shape — Happy Place in script and capitals. The preview is the SVG file itself.

“Happy” in Pacifico script over “PLACE” in narrow capitals, the two lines made the same width. Mixing a script with capitals is the classic sign-painter’s pairing.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 93 mm (3.94 × 3.64 in), scales to any size
Pieces	6 separate pieces
Outlines to cut	15: 6 outer edges and 9 cut-outs
Cut length	1,431 mm at this size
Narrowest part	2 mm at this size
Nodes	250 curve and line segments

Measured from the file. PNG: 2,000 × 1,856 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.93 in (25 × 23 mm)	0.51 mm	363 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 1.85 in (51 × 47 mm)	1 mm	727 mm	25	Vinyl, card and thin sheet
3 × 2.77 in (76 × 70 mm)	1.5 mm	1,090 mm	12	Vinyl, card and thin sheet
4 × 3.7 in (102 × 94 mm)	2 mm	1,454 mm	6	Vinyl, card and thin sheet
6 × 5.55 in (152 × 141 mm)	3 mm	2,181 mm	2	Any material, including 3 mm wood and acrylic
8 × 7.4 in (203 × 188 mm)	4.1 mm	2,908 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.1 in (305 × 282 mm)	6.1 mm	4,362 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Place SVG files

← Happy Place in block capitals All 12 Happy Place designs Happy Place with hearts →