Happy Place stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “HAPPY PLACE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 76 mm (3.94 × 3.01 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 11: 1 outer edge and 10 cut-outs |
| Cut length | 1,364 mm at this size |
| Narrowest part | 1.6 mm at this size |
| Nodes | 254 curve and line segments |
Measured from the file. PNG: 2,000 × 1,546 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.76 in (25 × 19 mm) | 0.41 mm | 346 mm | 120 | Too fine for most machines |
| 2 × 1.53 in (51 × 39 mm) | 0.81 mm | 693 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.29 in (76 × 58 mm) | 1.2 mm | 1,039 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.06 in (102 × 78 mm) | 1.6 mm | 1,386 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.58 in (152 × 116 mm) | 2.4 mm | 2,079 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.11 in (203 × 155 mm) | 3.3 mm | 2,772 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.17 in (305 × 233 mm) | 4.9 mm | 4,157 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Happy Place SVG files
-
Happy Place with a drop shadow Layered · 5 pieces
-
Happy Place with a sun Solid · 7 pieces
-
Happy Place in Pacifico Solid · 3 pieces
-
Happy Place in Lobster Solid · 6 pieces
-
Happy Place in Kaushan Script Solid · 10 pieces
-
Happy Place in Lilita One Solid · 10 pieces
-
Happy Place in Alfa Slab One Solid · 10 pieces
-
Happy Place in Amatic SC Solid · 10 pieces
← Happy Place outline lettering All 13 Happy Place designs Happy Place with a drop shadow →