Free Happy Place SVG

Happy Place in Lilita One SVG

Happy Place in Lilita One, as a solid black shape — Happy Place in Lilita One. The preview is the SVG file itself.

“Happy Place” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 65 mm (3.94 × 2.57 in), scales to any size
Pieces	10 separate pieces
Outlines to cut	16: 10 outer edges and 6 cut-outs
Cut length	890 mm at this size
Narrowest part	4.4 mm at this size
Nodes	257 curve and line segments

Measured from the file. PNG: 2,000 × 1,335 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.65 in (25 × 17 mm)	1.1 mm	226 mm	140	Vinyl, card and thin sheet
2 × 1.31 in (51 × 33 mm)	2.2 mm	452 mm	40	Vinyl, card and thin sheet
3 × 1.96 in (76 × 50 mm)	3.4 mm	678 mm	15	Any material, including 3 mm wood and acrylic
4 × 2.62 in (102 × 66 mm)	4.5 mm	904 mm	8	Any material, including 3 mm wood and acrylic
6 × 3.92 in (152 × 100 mm)	6.7 mm	1,356 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.23 in (203 × 133 mm)	8.9 mm	1,808 mm	2	Any material, including 3 mm wood and acrylic
12 × 7.85 in (305 × 199 mm)	13 mm	2,713 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Place SVG files

← Happy Place in Kaushan Script All 12 Happy Place designs Happy Place in Alfa Slab One →