Happy Place in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Happy Place” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 59 mm (3.94 × 2.33 in), scales to any size |
|---|---|
| Pieces | 10 separate pieces |
| Outlines to cut | 16: 10 outer edges and 6 cut-outs |
| Cut length | 983 mm at this size |
| Narrowest part | 2.9 mm at this size |
| Nodes | 219 curve and line segments |
Measured from the file. PNG: 2,000 × 1,217 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.59 in (25 × 15 mm) | 0.74 mm | 250 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.19 in (51 × 30 mm) | 1.5 mm | 499 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.78 in (76 × 45 mm) | 2.2 mm | 749 mm | 18 | Vinyl, card and thin sheet |
| 4 × 2.37 in (102 × 60 mm) | 2.9 mm | 999 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.56 in (152 × 90 mm) | 4.4 mm | 1,498 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.74 in (203 × 120 mm) | 5.9 mm | 1,997 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.12 in (305 × 181 mm) | 8.8 mm | 2,996 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Happy Place SVG files
-
Happy Place in Amatic SC Solid · 10 pieces
-
Happy Place in block capitals Solid · 10 pieces
-
Happy Place in script and capitals Solid · 6 pieces
-
Happy Place with hearts Solid · 12 pieces
-
Happy Place outline lettering Outline · 16 pieces
-
Happy Place stencil plate Solid · one piece
-
Happy Place with a drop shadow Layered · 5 pieces
-
Happy Place with a sun Solid · 7 pieces
← Happy Place in Lilita One All 13 Happy Place designs Happy Place in Amatic SC →