Free Happy Place SVG

Happy Place in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Happy Place in Lobster, as a solid black shape
Happy Place in Lobster. The preview is the SVG file itself.

“Happy Place” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 83 mm (3.94 × 3.25 in), scales to any size
Pieces6 separate pieces
Outlines to cut12: 6 outer edges and 6 cut-outs
Cut length1,174 mm at this size
Narrowest part1.4 mm at this size
Nodes230 curve and line segments

Measured from the file. PNG: 2,000 × 1,663 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.83 in (25 × 21 mm)0.36 mm298 mm110Too fine for most machines
2 × 1.65 in (51 × 42 mm)0.71 mm596 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.48 in (76 × 63 mm)1.1 mm895 mm12Vinyl, card and thin sheet
4 × 3.3 in (102 × 84 mm)1.4 mm1,193 mm6Vinyl, card and thin sheet
6 × 4.95 in (152 × 126 mm)2.1 mm1,789 mm2Vinyl, card and thin sheet
8 × 6.6 in (203 × 168 mm)2.8 mm2,386 mm1Vinyl, card and thin sheet
12 × 9.9 in (305 × 251 mm)4.3 mm3,578 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Happy Place SVG files

← Happy Place in Pacifico All 13 Happy Place designs Happy Place in Kaushan Script →