Free garland SVG

Double leaf swag garland with three bows SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Double leaf swag garland with three bows, as a solid black shape
Double leaf swag garland with three bows. The preview is the SVG file itself.

Two swags of leaves hung from three points, with a bow at each: a larger one in the middle and one at each end. The shape of a garland along a mantelpiece or a stair rail.

What is in the file

Size100 × 26 mm (3.94 × 1.04 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length611 mm at this size
Narrowest part2.1 mm at this size
Nodes301 curve and line segments

Measured from the file. PNG: 2,000 × 585 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.26 in (25 × 7 mm)0.53 mm155 mm260Fine detail: vinyl and paper only, weed with care
2 × 0.53 in (51 × 13 mm)1.1 mm310 mm80Vinyl, card and thin sheet
3 × 0.79 in (76 × 20 mm)1.6 mm466 mm36Vinyl, card and thin sheet
4 × 1.06 in (102 × 27 mm)2.1 mm621 mm18Vinyl, card and thin sheet
6 × 1.58 in (152 × 40 mm)3.2 mm931 mm6Any material, including 3 mm wood and acrylic
8 × 2.11 in (203 × 54 mm)4.3 mm1,242 mm5Any material, including 3 mm wood and acrylic
12 × 3.17 in (305 × 80 mm)6.4 mm1,862 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More garland SVG files

← Bead garland with tassels All 12 garlands Paper chain garland →