Free garland SVG

Leaf garland on a wavy stem SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Leaf garland on a wavy stem, as a solid black shape
Leaf garland on a wavy stem. The preview is the SVG file itself.

Fifteen pairs of pointed leaves on a gently waving stem that runs level from end to end, finishing in a single leaf. A plain border to put over or under a line of lettering.

What is in the file

Size100 × 23 mm (3.94 × 0.89 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut11: 1 outer edge and 10 cut-outs
Cut length528 mm at this size
Narrowest part2.1 mm at this size
Nodes245 curve and line segments

Measured from the file. PNG: 2,000 × 510 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.23 in (25 × 6 mm)0.53 mm134 mm280Fine detail: vinyl and paper only, weed with care
2 × 0.45 in (51 × 11 mm)1.1 mm268 mm90Vinyl, card and thin sheet
3 × 0.68 in (76 × 17 mm)1.6 mm402 mm39Vinyl, card and thin sheet
4 × 0.9 in (102 × 23 mm)2.1 mm536 mm22Vinyl, card and thin sheet
6 × 1.35 in (152 × 34 mm)3.2 mm805 mm7Any material, including 3 mm wood and acrylic
8 × 1.8 in (203 × 46 mm)4.3 mm1,073 mm6Any material, including 3 mm wood and acrylic
12 × 2.7 in (305 × 69 mm)6.4 mm1,609 mm4Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More garland SVG files

← Holly garland with berries All 12 garlands Greenery garland of round leaves →