Free garland SVG

Flower garland with leaves SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Flower garland with leaves, as a solid black shape
Flower garland with leaves. The preview is the SVG file itself.

A draped stem with two five-petalled flowers on each side, pairs of leaves between them, and a larger flower at the lowest point. For spring signs, Mother’s Day cards and wedding stationery.

What is in the file

Size100 × 28 mm (3.94 × 1.08 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut21: 1 outer edge and 20 cut-outs
Cut length452 mm at this size
Narrowest part1.8 mm at this size
Nodes160 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 606 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.28 in (25 × 7 mm)0.46 mm115 mm250Too fine for most machines
2 × 0.55 in (51 × 14 mm)0.91 mm230 mm80Fine detail: vinyl and paper only, weed with care
3 × 0.83 in (76 × 21 mm)1.4 mm344 mm33Vinyl, card and thin sheet
4 × 1.1 in (102 × 28 mm)1.8 mm459 mm18Vinyl, card and thin sheet
6 × 1.65 in (152 × 42 mm)2.7 mm689 mm6Vinyl, card and thin sheet
8 × 2.2 in (203 × 56 mm)3.7 mm918 mm5Any material, including 3 mm wood and acrylic
12 × 3.3 in (305 × 84 mm)5.5 mm1,378 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More garland SVG files

← Snowflake garland All 12 garlands Bead garland with tassels →