Free garland SVG

Pine garland in three colours SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pine garland in three colours, in layered colours
Pine garland in three colours. The preview is the SVG file itself.

The pine garland in green with five gold baubles hanging on threads and a red bow at each end. Cut the three colours and layer the bows and baubles over the green.

What is in the file

Size100 × 30 mm (3.94 × 1.19 in), scales to any size
Pieces8 separate pieces
Outlines to cut47: 8 outer edges and 39 cut-outs
Cut length1,048 mm at this size
Narrowest part1 mm at this size
Nodes412 curve and line segments
Layers3: garland, bows and baubles

Measured from the file. PNG: 2,000 × 660 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.3 in (25 × 8 mm)0.25 mm266 mm240Too fine for most machines
2 × 0.61 in (51 × 15 mm)0.51 mm532 mm75Fine detail: vinyl and paper only, weed with care
3 × 0.91 in (76 × 23 mm)0.76 mm799 mm33Fine detail: vinyl and paper only, weed with care
4 × 1.21 in (102 × 31 mm)1 mm1,065 mm16Vinyl, card and thin sheet
6 × 1.82 in (152 × 46 mm)1.5 mm1,597 mm6Vinyl, card and thin sheet
8 × 2.42 in (203 × 62 mm)2 mm2,130 mm4Vinyl, card and thin sheet
12 × 3.64 in (305 × 92 mm)3 mm3,194 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More garland SVG files

← Paper chain garland All 12 garlands Christmas pine garland with bows →