Free garland SVG

Christmas pine garland with bows SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Christmas pine garland with bows, as a solid black shape
Christmas pine garland with bows. The preview is the SVG file itself.

A swag of pine needles that sags in the middle, with a bow at each end where it would be pinned up. The needles on both halves sweep towards the centre, so the garland is symmetrical.

What is in the file

Size100 × 26 mm (3.94 × 1.01 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut46: 1 outer edge and 45 cut-outs
Cut length872 mm at this size
Narrowest part1.7 mm at this size
Nodes380 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 571 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.26 in (25 × 7 mm)0.43 mm221 mm260Too fine for most machines
2 × 0.51 in (51 × 13 mm)0.86 mm443 mm85Fine detail: vinyl and paper only, weed with care
3 × 0.77 in (76 × 20 mm)1.3 mm664 mm36Vinyl, card and thin sheet
4 × 1.03 in (102 × 26 mm)1.7 mm886 mm18Vinyl, card and thin sheet
6 × 1.54 in (152 × 39 mm)2.6 mm1,329 mm7Vinyl, card and thin sheet
8 × 2.06 in (203 × 52 mm)3.5 mm1,772 mm5Any material, including 3 mm wood and acrylic
12 × 3.08 in (305 × 78 mm)5.2 mm2,658 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More garland SVG files

← Pine garland in three colours All 12 garlands Holly garland with berries →