Free Forty and Fabulous SVG

Forty and Fabulous outline lettering SVG

Forty and Fabulous outline lettering, drawn as a line
Forty and Fabulous outline lettering. The preview is the SVG file itself.

“Forty and Fabulous” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 43 mm (3.94 × 1.67 in), scales to any size
Pieces20 separate pieces
Outlines to cut46: 20 outer edges and 26 cut-outs
Cut length1,520 mm at this size
Narrowest part1.4 mm at this size
Nodes499 curve and line segments

Measured from the file. PNG: 2,000 × 894 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.43 in (25 × 11 mm)0.36 mm386 mm190Too fine for most machines
2 × 0.85 in (51 × 22 mm)0.71 mm772 mm55Fine detail: vinyl and paper only, weed with care
3 × 1.27 in (76 × 32 mm)1.1 mm1,158 mm24Vinyl, card and thin sheet
4 × 1.7 in (102 × 43 mm)1.4 mm1,544 mm12Vinyl, card and thin sheet
6 × 2.55 in (152 × 65 mm)2.1 mm2,316 mm4Vinyl, card and thin sheet
8 × 3.4 in (203 × 86 mm)2.8 mm3,089 mm3Vinyl, card and thin sheet
12 × 5.1 in (305 × 130 mm)4.3 mm4,633 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Forty and Fabulous SVG files

← Forty and Fabulous with stars All 12 Forty and Fabulous designs Forty and Fabulous stencil plate →