Free Forty and Fabulous SVG

Forty and Fabulous with stars SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Forty and Fabulous with stars, as a solid black shape
Forty and Fabulous with stars. The preview is the SVG file itself.

“Forty and Fabulous” in Lobster with a row of three stars above the words and three below, the middle one larger. The stars are loose pieces, spaced to the width of the lettering.

What is in the file

Size100 × 89 mm (3.94 × 3.51 in), scales to any size
Pieces13 separate pieces
Outlines to cut21: 13 outer edges and 8 cut-outs
Cut length1,369 mm at this size
Narrowest part1 mm at this size
Nodes392 curve and line segments

Measured from the file. PNG: 2,000 × 1,790 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.89 in (25 × 23 mm)0.25 mm348 mm110Too fine for most machines
2 × 1.78 in (51 × 45 mm)0.51 mm695 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.67 in (76 × 68 mm)0.76 mm1,043 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.56 in (102 × 91 mm)1 mm1,391 mm6Vinyl, card and thin sheet
6 × 5.35 in (152 × 136 mm)1.5 mm2,086 mm2Vinyl, card and thin sheet
8 × 7.13 in (203 × 181 mm)2 mm2,782 mm1Vinyl, card and thin sheet
12 × 10.69 in (305 × 272 mm)3 mm4,173 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Forty and Fabulous SVG files

← Forty and Fabulous in script and capitals All 13 Forty and Fabulous designs Forty and Fabulous outline lettering →