Free Forty and Fabulous SVG

Forty and Fabulous in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Forty and Fabulous in Pacifico, as a solid black shape
Forty and Fabulous in Pacifico. The preview is the SVG file itself.

“Forty and Fabulous” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 60 mm (3.94 × 2.36 in), scales to any size
Pieces5 separate pieces
Outlines to cut16: 5 outer edges and 11 cut-outs
Cut length1,129 mm at this size
Narrowest part1.4 mm at this size
Nodes416 curve and line segments

Measured from the file. PNG: 2,000 × 1,231 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.6 in (25 × 15 mm)0.36 mm287 mm150Too fine for most machines
2 × 1.2 in (51 × 30 mm)0.71 mm574 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.8 in (76 × 46 mm)1.1 mm860 mm18Vinyl, card and thin sheet
4 × 2.4 in (102 × 61 mm)1.4 mm1,147 mm8Vinyl, card and thin sheet
6 × 3.6 in (152 × 91 mm)2.1 mm1,721 mm3Vinyl, card and thin sheet
8 × 4.8 in (203 × 122 mm)2.8 mm2,294 mm2Vinyl, card and thin sheet
12 × 7.2 in (305 × 183 mm)4.3 mm3,441 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Forty and Fabulous SVG files

← Forty and Fabulous with a birthday cake All 13 Forty and Fabulous designs Forty and Fabulous in Lobster →