Free Forty and Fabulous SVG

Forty and Fabulous in Alfa Slab One SVG

Forty and Fabulous in Alfa Slab One, as a solid black shape — Forty and Fabulous in Alfa Slab One. The preview is the SVG file itself.

“Forty and Fabulous” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 39 mm (3.94 × 1.55 in), scales to any size
Pieces	16 separate pieces
Outlines to cut	22: 16 outer edges and 6 cut-outs
Cut length	957 mm at this size
Narrowest part	2 mm at this size
Nodes	507 curve and line segments

Measured from the file. PNG: 2,000 × 835 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.39 in (25 × 10 mm)	0.51 mm	243 mm	200	Fine detail: vinyl and paper only, weed with care
2 × 0.79 in (51 × 20 mm)	1 mm	486 mm	60	Vinyl, card and thin sheet
3 × 1.18 in (76 × 30 mm)	1.5 mm	729 mm	24	Vinyl, card and thin sheet
4 × 1.58 in (102 × 40 mm)	2 mm	972 mm	12	Vinyl, card and thin sheet
6 × 2.36 in (152 × 60 mm)	3 mm	1,458 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.15 in (203 × 80 mm)	4.1 mm	1,945 mm	3	Any material, including 3 mm wood and acrylic
12 × 4.73 in (305 × 120 mm)	6.1 mm	2,917 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Forty and Fabulous SVG files

← Forty and Fabulous in Lilita One All 12 Forty and Fabulous designs Forty and Fabulous in Amatic SC →