Forty and Fabulous with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Forty and Fabulous” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 61 mm (3.94 × 2.41 in), scales to any size |
|---|---|
| Pieces | 8 separate pieces |
| Outlines to cut | 27: 8 outer edges and 19 cut-outs |
| Cut length | 1,812 mm at this size |
| Narrowest part | 3.2 mm at this size |
| Nodes | 612 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,254 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.61 in (25 × 16 mm) | 0.81 mm | 460 mm | 150 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.22 in (51 × 31 mm) | 1.6 mm | 920 mm | 40 | Vinyl, card and thin sheet |
| 3 × 1.84 in (76 × 47 mm) | 2.4 mm | 1,381 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.45 in (102 × 62 mm) | 3.3 mm | 1,841 mm | 8 | Any material, including 3 mm wood and acrylic |
| 6 × 3.67 in (152 × 93 mm) | 4.9 mm | 2,761 mm | 3 | Any material, including 3 mm wood and acrylic |
| 8 × 4.9 in (203 × 124 mm) | 6.5 mm | 3,682 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.34 in (305 × 187 mm) | 9.8 mm | 5,523 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Forty and Fabulous SVG files
-
Forty and Fabulous with a birthday cake Solid · 12 pieces
-
Forty and Fabulous in Pacifico Solid · 5 pieces
-
Forty and Fabulous in Lobster Solid · 7 pieces
-
Forty and Fabulous in Kaushan Script Solid · 15 pieces
-
Forty and Fabulous in Lilita One Solid · 16 pieces
-
Forty and Fabulous in Alfa Slab One Solid · 16 pieces
-
Forty and Fabulous in Amatic SC Solid · 16 pieces
-
Forty and Fabulous in block capitals Solid · 16 pieces
← Forty and Fabulous stencil plate All 13 Forty and Fabulous designs Forty and Fabulous with a birthday cake →