Free Forty and Fabulous SVG

Forty and Fabulous in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Forty and Fabulous in Lobster, as a solid black shape
Forty and Fabulous in Lobster. The preview is the SVG file itself.

“Forty and Fabulous” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 57 mm (3.94 × 2.24 in), scales to any size
Pieces7 separate pieces
Outlines to cut15: 7 outer edges and 8 cut-outs
Cut length1,132 mm at this size
Narrowest part1 mm at this size
Nodes332 curve and line segments

Measured from the file. PNG: 2,000 × 1,171 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.57 in (25 × 14 mm)0.25 mm288 mm150Too fine for most machines
2 × 1.14 in (51 × 29 mm)0.51 mm575 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.71 in (76 × 43 mm)0.76 mm863 mm18Fine detail: vinyl and paper only, weed with care
4 × 2.28 in (102 × 58 mm)1 mm1,150 mm8Vinyl, card and thin sheet
6 × 3.41 in (152 × 87 mm)1.5 mm1,725 mm3Vinyl, card and thin sheet
8 × 4.55 in (203 × 116 mm)2 mm2,300 mm2Vinyl, card and thin sheet
12 × 6.83 in (305 × 173 mm)3 mm3,450 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Forty and Fabulous SVG files

← Forty and Fabulous in Pacifico All 13 Forty and Fabulous designs Forty and Fabulous in Kaushan Script →