Forty and Fabulous in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Forty and Fabulous” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 45 mm (3.94 × 1.78 in), scales to any size |
|---|---|
| Pieces | 16 separate pieces |
| Outlines to cut | 22: 16 outer edges and 6 cut-outs |
| Cut length | 914 mm at this size |
| Narrowest part | 2.6 mm at this size |
| Nodes | 274 curve and line segments |
Measured from the file. PNG: 2,000 × 944 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.45 in (25 × 11 mm) | 0.66 mm | 232 mm | 180 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.9 in (51 × 23 mm) | 1.3 mm | 464 mm | 55 | Vinyl, card and thin sheet |
| 3 × 1.35 in (76 × 34 mm) | 2 mm | 696 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.8 in (102 × 46 mm) | 2.6 mm | 929 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.71 in (152 × 69 mm) | 4 mm | 1,393 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.61 in (203 × 92 mm) | 5.3 mm | 1,857 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.41 in (305 × 137 mm) | 7.9 mm | 2,786 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Forty and Fabulous SVG files
-
Forty and Fabulous in Alfa Slab One Solid · 16 pieces
-
Forty and Fabulous in Amatic SC Solid · 16 pieces
-
Forty and Fabulous in block capitals Solid · 16 pieces
-
Forty and Fabulous in script and capitals Solid · 11 pieces
-
Forty and Fabulous with stars Solid · 13 pieces
-
Forty and Fabulous outline lettering Outline · 18 pieces
-
Forty and Fabulous stencil plate Solid · one piece
-
Forty and Fabulous with a drop shadow Layered · 8 pieces
← Forty and Fabulous in Kaushan Script All 13 Forty and Fabulous designs Forty and Fabulous in Alfa Slab One →